Charger V8-5.7L (2008)
5. 5.7L/6.1L Engine - Unthread tube nut, then remove pressure hose (2) from pump (1).
6. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
7. Remove belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Removal
8. Remove screw fastening pressure hose routing clamp (1) to front of engine cradle (2).
9. Remove screw fastening pressure hose routing clamp to left side of engine cradle.
10. Unthread return hose tube nut (1), then remove return hose from steering gear (2).
11. Unthread pressure hose tube nut (3), then remove pressure hose from steering gear (2) and vehicle.
Pressure Hose - Rear-Wheel-Drive
REAR-WHEEL-DRIVE