Charger V8-5.7L (2008)
10. Remove jack (3) from under rear axle differential.
11. If previously lowered, raise rear exhaust back to mounted position and connect exhaust isolators at muffler and resonators hangers. Remove jack
or stand below exhaust muffler.
12. Install fuel filler tube. See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Fuel Filler Neck/Service and Repair/Installation
13. Install tire and wheel assemblies (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) (Police - 190 Nm (140 ft. lbs.)). See: Wheels and
Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation
14. Lower vehicle.
15. Position vehicle on alignment rack/drive-on lift. Raise vehicle as necessary to access mounting bolts.