Charger V8-5.7L (2008)
Control Arm: Service and Repair
Front Upper Control Arm - Installation
INSTALLATION
NOTE: Although All-Wheel-Drive and Rear-Wheel-Drive upper control arms are similar in appearance, they are not interchangeable.
1. Slide upper control arm (2) into bracket (3) located in shock tower (4).
2. Install upper control arm mounting (flag) bolts (1) through bracket, arm and tower. Position flags on bolt heads outward, toward wheel opening.
3. Export Only - If servicing right upper control arm, connect headlamp leveling sensor (2) link at upper control arm (1).
4. Move shock assembly (3) allowing studs to be inserted through shock tower (2) mounting holes.