Charger V8-5.7L (2008)
![background image](/dodge/charger/v8-5.7l/Page-1908004.png)
16. Install outer tie rod (2) end nut (1) at each knuckle (3). Tighten end nut to 86 Nm (63 ft. lbs.).
17. Install tire and wheel assembly (1). See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation.
18. Lower vehicle from hoist.
19. Install power steering fluid into pump reservoir. See: Steering/Power Steering/Power Steering Fluid/Testing and Inspection
20. Connect negative battery cable (2) to battery post.See: Starting and Charging/Battery/Service and Repair/Procedures/Battery Reconnection
21. Perform vehicle alignment. See: Alignment/Service and Repair