Charger V8-5.7L (2008)
9. Install wheel speed sensor (2) head into knuckle (4) and install mounting screw (1). Tighten screw to 11 Nm (95 in. lbs.).
10. Attach wheel speed sensor cable routing clip (3) at knuckle (4).
11. Install tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Tighten
wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) (Police - 190 Nm (140 ft. lbs.)).
12. Lower vehicle.
13. Pump brake pedal several times to ensure vehicle has a firm brake pedal before moving vehicle.
14. Check and adjust brake fluid level in reservoir (1) as necessary.
15. Perform wheel alignment. See: Alignment/Service and Repair
RWD
INSTALLATION