Charger V8-5.7L (2008)
Stabilizer Bar: Service and Repair
Front Stabilizer Bar - Removal
All-Wheel-Drive
ALL-WHEEL-DRIVE
1. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
2. Remove belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Removal
3. On each side of vehicle, remove nut (5) fastening stabilizer link (3) to stabilizer bar (4). Slide link ball joint stem (1) from bar.
4. On each side of vehicle, remove bolts (2) fastening stabilizer bar isolator retainer (3) in place.
5. Remove stabilizer bar with isolators and retainers from vehicle.
6. On each side of bar, remove retainers (3) from around stabilizer bar isolators (1).
7. Utilizing slit, remove each isolator (1) from stabilizer bar (2).
Rear-Wheel-Drive
REAR-WHEEL-DRIVE
1. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
2. Remove belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Removal