Charger V8-5.7L (2008)
5. Remove four bolts (3) fastening hub and bearing (2) to knuckle.
6. Slide hub and bearing (2) off axle half shaft (1) and knuckle.
RWD
RWD
1. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
2. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
3. Access and remove front brake rotor. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Removal
4. Remove dust cap (2). When doing this, avoid damaging internal bore of hub to preserve seal integrity.
5. Remove hub nut (1).