Charger V8-5.7L (2008)
![background image](/dodge/charger/v8-5.7l/Page-1446003.png)
4. Install axle assembly into vehicle.See: Service and Repair/Removal and Replacement/Front Axle - 175 FIA/Installation
5. Fill axle (1) with 600ml (0.64 qts.) Mopar(R) 75W-90 Synthetic Gear Lubricant. Torque fill plug (1) to 30 Nm (22 ft. lbs.)
Removal
REMOVAL
1. Remove propeller shaft and heat shield.See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Propeller Shaft -
Removal
2. Using Spanner Wrench 6958 (2), remove pinion flange nut.
3. Using Puller 1026 (1), remove pinion flange.
4. Remove pinion flange seal with suitable screwdriver and discard.
Installation