Charger V8-5.7L (2008)
3. Tighten nut on Crimping tool C-4975-A (3) until jaws on tool are closed completely together, face to face (4).
LATCHING TYPE BOOT CLAMP
1. Clamp sealing boot (3) onto tripod housing using clamp locking tool, Snap-On YA3050 (2) or an equivalent.
2. Place prongs of clamp locking tool in the holes of the clamp (1).
3. Squeeze tool together until top band of clamp is latched behind the two tabs on lower band of clamp (2).
