Charger V8-5.7L (2008)
Rear Door Window Glass: Service and Repair
Rear Door Glass - Installation
INSTALLATION
1. From the outside of the rear door, insert the rear door glass (1) into the top of the door shell to load the glass into the door.
2. Engage the glass into the two window regulator glass clamps (2).
3. Using the regulator, lower the window as required for access to the two window regulator glass clamp screws (3).
4. Tighten the screw in each of the glass clamps. Tighten the screws to 10 Nm (90 in. lbs.).
5. Reinstall the glass channel and bracket onto the inside of the rear door. See: Window Track/Service and Repair/Rear Door Glass Run Channel -
Installation.
6. Reinstall the watershield onto the inside of the rear door. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door
Panel/Service and Repair/Rear Door Watershield/Installation.
7. Reinstall the inner belt weatherstrip onto the rear door.
8. Reinstall the trim panel onto the inside of the rear door. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service
and Repair/Rear Door Trim Panel/Installation.