Charger V8-5.7L (2008)
Headlamp Washer Pump: Service and Repair
Installation
INSTALLATION
1. Use new grommet when installing a new pump assembly.
2. Assure that the pump is aligned to and fully seated in the reservoir cavity.
3. Install the washer reservoir See: Windshield Washer Reservoir/Service and Repair/Washer Reservoir - Installation.
4. Connect the electrical harness connectors to the washer pump motors and the fluid level sensor.
5. Connect the high pressure headlamp washer hose by firmly pushing hose onto inlet until a snap is heard.
6. Refill the reservoir with fluid drained previously.
7. Connect the battery negative cable.