dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

A/C Discharge Line|Page 9209 > < A/C Discharge Line|Page 9207
Page 1
background image

Hose/Line HVAC: Service and Repair
A/C Liquid Line

Removal

REMOVAL

WARNING:  Refer to the applicable warnings and cautions for this system before performing the following operation. Failure to follow the
warnings and cautions could result in possible personal injury or death.

NOTE:  The A/C liquid line is serviced in two sections. The rear section of the liquid line is serviced as an assembly with the rear section of the A/C
suction line.

FRONT SECTION

1. Disconnect and isolate the negative battery cable.

2. Recover the refrigerant from the refrigerant system.

3. Remove the air cleaner housing.

4. Raise and support the vehicle.

5. Remove the front belly pan.

6. Remove the nut (3) that secures the front section of the A/C liquid line (4) to the A/C condenser (5).

7. Disconnect the A/C liquid line from the A/C condenser and remove and discard the dual plane seal.

8. Install plugs in, or tape over the opened liquid line fitting and condenser outlet port.

A/C Discharge Line|Page 9209 > < A/C Discharge Line|Page 9207