Charger V8-5.7L VIN H (2007)
20. On each side of vehicle, remove shock absorber (1) lower mounting bolt (2) and nut (4).
21. Carefully mark location of rear crossmember on body at all four mount (bushing) locations using a marker or crayon. Do not use a scratch awl to
mark location.
22. Position an extra pair of jack stands under and support forward end of engine cradle to help stabilize vehicle during rear suspension
removal/installation.
23. Position under-hoist utility jack or transmission jack (2) under center of rear crossmember (1). Raise jack head to contact crossmember and secure
in place.