Charger V8-5.7L VIN H (2007)
27. Remove coil springs and isolators (1, 2 and 5) from spring links.
28. Remove bolt (1) from bushing prior to removal.
NOTE: Prior to using Special Tool 9520, lubricate Bolt (1) threads to provide ease of use and promote tool longevity.
NOTE: When installing Thrust Bearing (6), be sure to place hardened side toward Bolt head.
29. Assemble tools (See following list) over bushing as shown.
-
(1) Bolt
-
(2) Nut
-
(3) Washer
-
(4) Receiver 9520-4