Charger SRT-8 V8-6.1L (2009)
3. Install speaker cover to instrument panel.
4. Connect battery negative cable.
INSTRUMENT PANEL CENTER SPEAKER
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection .
1. Connect electrical harness connector and position speaker.
2. Install and tighten mounting fasteners.
3. Install speaker cover to instrument panel.
4. Connect battery negative cable.
REAR SPEAKER - SEDAN
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection .
1. Connect electrical harness connector and position speaker.
2. Install and tighten mounting fasteners.
3. Install the rear shelf trim See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair/Rear Shelf Panel - Installation.
4. Install the lower C-pillar trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim
Panel-Installation.
5. Install the upper C-pillar trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim
Panel-Installation.
6. Connect the battery negative cable.
REAR SPEAKER - WAGON