Charger SRT-8 V8-6.1L (2009)
Front Bumper Cover / Fascia: Service and Repair
Front Bumper Fascia - Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the three push-pin retainers (1) that secure each front wheel house splash shield (2) to the front fascia assembly (3).
3. Remove the nine screws (1) that secure the belly pan (2) to the underbody.
NOTE: 300 Shown. Magnum and SRT8 similar
4. Remove the screw (5) that secures the front fascia assembly (4) to the nut insert (1) in each front fender.
5. Partially lower the vehicle and remove the push-pin retainers (2) (four-sedan, six-wagon, eight-Charger) that secure the front fascia assembly to the
