Charger SRT-8 V8-6.1L (2009)
Lower Side Moulding / Trim: Service and Repair
Body Cladding - Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the wheels from the side of the vehicle being serviced See: Maintenance/Wheels and Tires/Service and Repair/Removal and
Replacement/Tires and Wheels - Removal.
3. Remove the pop rivets (2 and 5) from the front fender (1) and rear quarter panel (6).
4. Remove the rear body side cladding (4) by disengaging the cladding retaining clips from the rocker panel (7).
5. Remove the front body side cladding (3) by disengaging the retaining clip from the front fender.