Charger SRT-8 V8-6.1L (2009)
Rear Fender Liner: Service and Repair
Splash Shield - Installation
INSTALLATION
1. Position the rear wheelhouse shield (2) into the rear wheelwell.
2. Install the push-pins (1) that secure the rear wheelhouse shield to the body.
3. Position the lower rear wheelhouse shield (3) onto the body.
4. Install the nuts (1), bolt (2) and the push-pins (4) that secure the lower rear wheelhouse shield to the body. Tighten the nuts and the bolt securely.
5. Install the rear portion of the body side cladding See: Exterior Moulding / Trim/Lower Side Moulding / Trim/Service and Repair/Body Cladding -
Installation.
6. Install the wheels See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation.
7. Lower the vehicle.
