Charger SRT-8 V8-6.1L (2009)
7. Remove the mat from the cubby bin at the front of the floor console.
8. Open the lid of the console rear bin and remove the mat from the rear bin.
9. Remove the two screws (1) that secure the front of the console shifter bezel to the console.
10. Using a trim stick unsnap the console bezel from the console
11. Remove the shifter bezel from around the gear selector lever.
12. Remove the three 8 mm bolts (2) from the rear bin that secure the console to the floor panel transmission tunnel.
13. Remove the two screws (3) that secure the front of the console to the instrument panel.
14. Slide the console rearward far enough to access and disconnect the jumper wire connector (4) from the accessory power outlet on the underside of
the console.
15. If equipped, disconnect rear heated seat connector.
16. Remove the floor console from the vehicle.
Center Console Cover with DVD
