Charger SRT-8 V8-6.1L (2009)
Sunroof / Moonroof Motor: Service and Repair
Sunroof Motor - Removal
REMOVAL
WARNING: The Excessive Force Limitation (EFL) feature must be calibrated any time a sunroof motor/module is replaced with a new
component. Failure to perform this procedure could result in vehicle damage and/or personal injury.See: Testing and
Inspection/Programming and Relearning for the appropriate procedure.
1. Disconnect the battery negative cable.
2. Remove the vehicle headliner, See: Interior Moulding / Trim/Headliner/Service and Repair/Headliner - Removal.
3. Remove the power sunroof motor/module electrical connector (2).
4. Remove the retaining screws (3) and remove the motor/module (1) from the vehicle.