Charger SRT-8 V8-6.1L (2009)
1. Place the 40% section (3) into position onto the studs.
2. Fold the 40% section of the seat down.
3. Install the four nuts (4) attaching seat back (3). Tighten nuts to 57 Nm (42 ft. lbs.).
NON-FOLDING SEAT BACK
1. Install the seat back to the vehicle.
2. Align the snap fasteners at the top of the rear seat back and engage the snap fasteners to secure the seat back.
3. Install the lower seat back mounting fasteners. Tighten to 57 Nm (42 ft. lbs.).
