Charger SRT-8 V8-6.1L (2009)
60/40 SEAT BACK - EXPORT SEDAN
60% SEAT BACK SIDE
1. With the 40% seat back removed.
2. Remove the four nuts (1) and (3) attaching seat back.
3. Remove the seat back from vehicle.
NON-FOLDING SEAT BACK
1. Remove the lower seat back mounting fasteners.
2. Disengage the upper seat back snap fasteners by using a flat blade tool inserted at the top of the seat and pushing down on spring fasteners to
disengage.
3. Remove the seat back from the vehicle.
Seat Back - Installation
INSTALLATION
1. Place seat belt into position and install the seat belt anchor nut. Tighten nut to 32 Nm (24 ft. lbs.).
2. Place the seat cushion into position and push downward on the forward edge of the seat cushion to lock into position. See: Seat Cover/Service and
Repair/Seat Cushion Cover - Removal
60/40 SEAT BACK - WAGON
60% SEAT BACK SIDE