Charger SRT-8 V8-6.1L (2009)
Seat Cover: Service and Repair
Seat Back Cover - Installation
INSTALLATION
1. Before proceeding with the following repair procedure, review all warnings and cautions. See: Service Precautions
2. With the cover turned inside out, align the head rest guide sleeve holes with the trim cover on the foam pad.
3. Roll the cover down over the seat back.
4. Hog ring the horizontal wire in the trim cover to the wire in the foam pad.
5. Continue rolling the cover completely down the back.
6. Insert the two vertical support wires into the vertical pockets on the trim cover.
