Charger SRT-8 V8-6.1L (2009)
4. Align components and install the ABM (1) on the HCU (2).
5. Install the four screws (1) attaching the ABM (2) to the HCU. Tighten the mounting screws to 2 Nm (17 in. lbs.).
6. Attach the mounting bracket to the HCU. Install two mounting bracket attaching screws and tighten to 11 Nm (97 in. lbs.).
7. Install the ICU in the vehicle. See: Removal and Replacement/Integrated Control Unit (ICU) - Installation
Integrated Control Unit (ICU) - Disassembly
DISASSEMBLY
CAUTION: For Adaptive Cruise Control (ACC) equipped vehicles, the ABM and HCU are not separately serviceable. They must be replaced
as an assembly.
1. Remove two screws attaching the mounting bracket to the HCU. Remove the bracket.