Charger SRT-8 V8-6.1L (2009)
NOTE: To release sensor connector from body wiring harness connector (1) in following step, move retaining clip (2) as indicated here, then
pull sensor connector (3) outward.
2. Remove sensor connectors (3 and 4) from body wiring harness connector (1) located in luggage compartment floor pan (2).
3. Separate left sensor connector (4) from right sensor connector (3).
4. If removing left sensor, unclip sensor cable (3) from routing clip near body connector (1).
5. If removing left sensor, unclip sensor cable (1) from routing clips (2) along rear of crossmember near rear differential (3).
