Charger SRT-8 V8-6.1L (2009)
10. Connect battery negative cable (2) to battery post. It is important that this is performed properly. See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery Reconnection
11. Synchronize brake pedal to accelerator pedal, then connect adjuster cable (1) to adjuster motor (2). See: Procedures
12. If vehicle is equipped with memory seats, the system will need to be initialized. Refer to appropriate diagnostic information.
13. Test operation of adjustable pedals.
14. Road test vehicle testing operation of brakes and accelerator.
