dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Speed Control Switch - Removal|Page 8474 > < Speed Control Switch - Removal
Page 2
background image

Police Package Speed Control Switch

POLICE PACKAGE SPEED CONTROL SWITCH

WARNING: Before servicing the steering column the airbag system must be disarmed. Refer to electrical restraint system for service

procedures.  See: Restraint Systems/Service and Repair Failure to do so may result in accidental deployment of the airbag and
possible serious personal and/or fatal injury may result.

NOTE: Position the front wheels straight-ahead.

1. Fully extend or pull out adjustable steering column.
2. Disconnect and isolate negative battery cable at battery.
3. Remove the driver airbag (3), See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Driver Air Bag - Removal.

4. Remove steering wheel retaining bolt (2), then slide the steering wheel (1) off the shaft.

Speed Control Switch - Removal|Page 8474 > < Speed Control Switch - Removal