Charger SRT-8 V8-6.1L (2009)
23. Fill the engine with oil.
24. Install engine covers (1).
25. Start engine and check for leaks.
Camshaft Core Hole Plug - Removal
CAMSHAFT CORE HOLE PLUG
CAUTION: Do not damage the rear surface of the camshaft or the core plug sealing surface, when removing the core plug.
1. Remove the transmission.
2. Remove the rear cam bearing core plug.
Camshaft Core Hole Plug - Installation
CAMSHAFT CORE HOLE PLUG
1. Clean core hole in block.
NOTE: Do not apply adhesive to the new core hole plug. A new plug will have adhesive pre-applied.
2. Install a new core hole plug at the rear of camshaft, using suitable flat faced tool. The plug must be fully seated on the cylinder block shoulder.
3. Install transmission.