Charger SRT-8 V8-6.1L (2009)
Rocker Arm Assembly: Service and Repair
Valve Rocker Arm - Installation
INSTALLATION
CAUTION: The longer pushrods are for the exhaust side, and the shorter pushrods are for intake side.
1. Install the pushrods in the same order as removed.
2. Install the Pushrod Retainer 9070 (1).
CAUTION: Ensure that retainers (2) and rocker arms (4) are not overlapped when torquing bolts.
CAUTION: Verify that push rod is installed into rocker arm (4) and tappet correctly while installing rocker shaft assembly. Recheck after
rocker shaft has been torqued to specification.
