Charger SRT-8 V8-6.1L (2009)
Valve: Removal and Replacement
Intake and Exhaust Valves - Removal
REMOVAL
1. Remove the cylinder head See: Service and Repair/Removal and Replacement/Cylinder Head - Removal
2. Compress the valve springs using the valve spring compressor C-3422-D and adapter 8464.
3. Remove the valve retaining locks (1), valve spring retainers (2), valve stem seals (3) and valve springs (6).
4. Before removing the valves, remove any burrs from the valve stem lock grooves to prevent damage to the valve guides. Identify the valves to
ensure installation in original location.
Intake and Exhaust Valves - Installation
INSTALLATION