dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Oil Temperature Sensor - Removal|Page 2174 > < Oil Temperature Sensor/Switch, Engine|Locations|Page 2171
Page 1
background image

Oil Temperature Sensor/Switch: Service and Repair
Oil Temperature Sensor - Removal

REMOVAL

1. Disconnect and isolate the negative battery cable.
2. Remove the accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and

Replacement/Serpentine Accessory Drive Belt - Removal 

3. Remove the generator upper mounting bolt.
4. Raise and support the vehicle.

5. Remove the lower splash shield retaining bolts (1) and the splash shield.

6. Remove the generator lower mounting bolts (1).
7. Lower the vehicle.
8. Position the generator aside to gain access to the oil temperature sensor.

Oil Temperature Sensor - Removal|Page 2174 > < Oil Temperature Sensor/Switch, Engine|Locations|Page 2171