Charger SRT-8 V8-6.1L (2009)
Front Crankshaft Seal: Service and Repair
Front Crankshaft Oil Seal - Removal
REMOVAL
1. Disconnect negative cable from battery (1).
2. Remove accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and
Replacement/Serpentine Accessory Drive Belt - Removal.
3. Drain cooling system See: Cooling System/Service and Repair.
4. Remove upper radiator hose.
5. Remove radiator shroud attaching fasteners.
6. Remove radiator cooling fan and shroud See: Cooling System/Radiator Cooling Fan/Service and Repair/Cooling Fan - Removal.
7. Remove crankshaft damper bolt.
8. Remove damper using the Crankshaft Insert 8513A (2) and Three Jaw Puller 1023 (1) See: Cylinder Block Assembly/Harmonic Balancer -
Crankshaft Pulley/Service and Repair/Vibration Damper - Removal.
