Charger SRT-8 V8-6.1L (2009)
Exhaust Manifold: Removal and Replacement
Exhaust Manifold - Removal
REMOVAL
EXHAUST MANIFOLD - LEFT SIDE
1. Disconnect negative battery cable.
2. Remove air cleaner housing (1).
3. Remove coolant bottle, and set aside without removing hoses. See: Cooling System/Coolant Reservoir/Service and Repair/Coolant Recovery
Bottle - Removal
4. Remove the top row of bolts from manifold from under the hood.
5. Support and raise the vehicle on a hoist.
6. Remove the lower splash shield.
7. Remove the exhaust pipe as an assembly.
8. Remove the knock sensor.
9. Remove the bottom row of bolts from manifold from under vehicle.
10. Remove manifold from under vehicle.
EXHAUST MANIFOLD - RIGHT SIDE