Charger SRT-8 V8-6.1L (2009)
9. Install the bolt (5) that secures the refrigerant line mounting bracket (6) to the left front shock tower (4). Tighten the bolt to 11 Nm (97 in. lbs.).
10. Connect the wire harness (3) to the A/C pressure transducer (2).
11. Reconnect the negative battery cable.
12. Evacuate the refrigerant system See: Service and Repair/Refrigerant System Evacuate.
13. Adjust the refrigerant oil level See: Specifications/Capacity Specifications/Refrigerant Oil Capacity.
14. Charge the refrigerant system See: Service and Repair/Refrigerant System Charge.
