Charger SRT-8 V8-6.1L (2009)
3. Disconnect the electrical connector (1).
4. Remove the two retaining screws (2).
C-PILLAR MOUNTED SIDE IMPACT SENSOR
1. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service.
Failure to do so may result in accidental airbag deployment, personal injury or death.
2. Remove the C-pillar trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim
Panel-Removal.
3. Disconnect the electrical connector (3).
4. Remove the two retaining screws (2).