Charger SRT-8 V8-6.1L (2009)
4. Connect battery cable to TIPM. Tighten the nut to 20 - 28 Nm (15 - 21 ft. lbs.).
5. Close the battery cable nut cover.
6. Connect negative battery cable (2).
7. Insert the ignition key and turn it to the RUNposition and wait twenty seconds. The TIPM will collect the necessary vehicle configuration and VIN
data from the CCN and PCM at this time. After twenty seconds turn the ignition key to the OFFposition and then back to the ONposition and
verify proper vehicle systems operation.
