Charger SRT-8 V8-6.1L (2009)
10. Unthread return hose tube nut (1), then remove return hose from steering gear (2).
11. Unthread pressure hose tube nut (3), then remove pressure hose from steering gear (2) and vehicle.
Return Hose - Gear to Cooler
GEAR TO COOLER - RWD
1. Disconnect and isolate battery negative cable (2) from battery post.
2. Siphon power steering fluid from pump reservoir.
3. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
4. Remove belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Removal
