Charger SRT-8 V8-6.1L (2009)
Power Steering Pump: Service and Repair
Power Steering Pump - Removal
5.7L/6.1L
1. Disconnect and isolate battery negative cable (2) from battery post.
2. Siphon power steering fluid from pump reservoir.
3. Remove air cleaner housing and inlet tube to throttle body. See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance
Checks/Air Cleaner Housing/Service and Repair/Air Cleaner Body - Removal
4. Remove serpentine drive belt. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair/Removal and Replacement/Serpentine Accessory Drive Belt - Removal
5. Remove hose clamp, then supply hose (3) from pump (1).
