Charger SRT-8 V8-6.1L (2009)
10. Install tire and wheel assemblies (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) (Police - 190 Nm (140 ft. lbs.)). See: Wheels and
Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation
11. Lower vehicle.
12. Connect battery negative cable (2) to battery post. It is important that this is performed properly. See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery Reconnection
13. Fill and bleed power steering system. See: Service and Repair/Power Steering System Bleeding
14. Perform wheel alignment setting toe to specifications. See: Alignment/Service and Repair
15. Tighten tie rod jam nuts (1) to 75 Nm (55 ft. lbs.).
Rear Wheel Drive
REAR-WHEEL-DRIVE
