dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Shift Cable - Removal|Page 3935 > < Shift Cable - Removal
Page 2
background image

10. From under the hood, remove the shift cable grommet (2) from the dash panel.
11. Remove gearshift cable (1) from vehicle.

Column Mount

COLUMN MOUNT

1. Place the shifter in PARK
2. Raise the vehicle.

3. Remove the gearshift cable retaining clip (4) (if equipped).
4. Disconnect the gearshift cable (1) from the shift lever (3), and remove cable from bracket (2).

5. Lower the vehicle.
6. Remove the instrument panel side trim.
7. Remove the knee bolster fasteners, and the knee bolster.
8. If equipped, disconnect the trunk release harness connector from the trunk release switch on the knee bolster.

Shift Cable - Removal|Page 3935 > < Shift Cable - Removal