Charger SRT-8 V8-6.1L (2009)
Shifter Wiring Connectors
9. Install the wiring harness connectors (2) to the shifter assembly.
10. Verify that the shift lever is in the PARK position and the transmission park sprag is set by rocking the vehicle.
11. Tighten the adjustment screw to 7 Nm (65 in.lbs.).
12. Verify correct shifter, park lock, and BTSI operation.
13. Install any console parts removed for access to shift lever assembly and shift cables. See: Body and Frame/Interior Moulding /
Trim/Console/Service and Repair/Floor Console - Installation
Column Mount
SHIFTER - COLUMN MOUNT
The column mounted shifter is serviced with the steering column See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering
Column - Installation.
