Charger SRT-8 V8-6.1L (2009)
Seals and Gaskets: Service and Repair
Pinion Seal - Installation
INSTALLATION
1. Apply light coating of gear lubricant to the lip of the pinion seal.
2. Using Installer 10146 (1), install pinion seal until tool bottoms on carrier.
3. Install pinion flange into position. Align index marks made during disassembly to maintain assembly balance.
4. Using Installer 6448A (1), lightly tap on pinion flange (2) until enough pinion shaft threads are exposed to install the pinion flange, and start the
pinion nut.
