Charger SRT-8 V8-6.1L (2009)
Power Window Switch: Service and Repair
Power Window Switch - Installation
INSTALLATION
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection .
1. Install switch (1) to rear door trim panel (2).
2. Install rear door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door Trim
Panel - Installation.
3. Connect battery negative cable.