Charger SRT-8 V8-6.1L (2009)
Headlamp Washer Hose: Service and Repair
Headlamp Washer Hose - Installation
INSTALLATION
The headlamp washer hose is a special high pressure hose with specific fittings, and must be replaced as a unit.
1. Install the new high pressure headlamp washer hose (2) assembly. Push fitting (3) on until a snap is heard.
2. Install the fascia See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Front Bumper Fascia - Installation
.
3. Connect the battery negative cable.
