Charger SRT-8 V8-6.1L VIN W (2006)
12.
Remove both of the old fascia over-slam bumper assemblies (Fig. 4).
NOTE:
Use a small flat-head screwdriver to remove pushpin.
13.
Install two (2) new fascia bumper assemblies (Fig. 4).
14.
Close and open the deck lid five (5) times to adjust the system.
15.
Rub out or spot repair the rear fascia paint surface and deck lid edge as necessary.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
Technical Service Bulletin # 23-052-05
Date:
051104
Body - Gap Between Rear Fascia & Body Side/Tail Lamp
NUMBER: 23-052-05
GROUP: Body
DATE: November 4, 2005
THIS BULLETIN IS BEING PROVIDED IN ADVANCE. DO NOT ORDER PARTS OR PERFORM ANY ACTIONS RELATED TO THIS
BULLETIN UNTIL NOVEMBER 21, 2005.