Charger SRT-8 V8-6.1L VIN W (2006)
4. Place the floor shifter lever in PARK position.
5. Loosen the adjustment screw (5) on the gearshift cable (1).
6. Install the gearshift cable (1) to the shift lever pin (3).
7. Install the park lock cable (1) to the shift mechanism cam (3) and the notch in the shifter assembly (2).
8. Verify that the key is in the LOCK position and remains there until the cable is fully adjusted.
9. Verify that the park lock cable adjustment tab is pulled upward to the unlocked position.
10. Install the wiring harness connectors (2) to the shifter assembly
11. Verify that the shift lever is in the PARK position.
12. Tighten the adjustment screw to 7 Nm (65 inch lbs.).
13. Verify that the key in the LOCK position and the shifter is in PARK.