Colt L4-089 1468cc 1.5L VIN K 2-bbl (1988)
Locks: Technical Service Bulletins
Valet Key - Cutting Procedure
NO.:
23-13-90
GROUP:
BODY
DATE:
Nov. 5, 1990
SUBJECT:
Cutting a Valet Key For
a Laser or Colt
MODELS:
1990-91 BD - Laser 1988-90 B2 - Colt (Vehicles built on or after April 1, 1988)
DISCUSSION:
A procedure for cutting a valet key for the listed models has been developed and is illustrated below.
PARTS:
1
Key Blank
MB543052
PROCEDURE:
1.
Set the key code on the key cutter (Curtis product) and cut the notches in the key blank.
2.
To make a valet key from the newly cut key, use a small file or stationary grinder to carefully cut out the hatched section shown in the illustration
and remove all burrs.
