Colt L4-089 1468cc 1.5L VIN K 2-bbl (1988)
POLICY:
Information only - These belts are to be installed at customer expense.
Colt
1.
Remove rear seat.
2.
Leave center belts (white belts in the illustration) of rear seat belts as they are and replace L.H. and R.H. side seat belts (black belts in the
illustration).
3.
Remove the following trims.
3-door hatch back model ^ Rear pillar trim ^Quarter trim
Sedan
^ Rear pillar trim
^
Rear wheelhouse trim
4.
Insert retractor lock pin of replacement seat belt positively in hole provided in body. Then tighten bolts to specified torque to install retractor.
Specified torque:
35-55 N-m (26-40 ft.lbs.)
