Colt L4-1597cc 1.6L SOHC Turbo (1984)
FIGURE 4
10.
Before inserting replacement odometer chip into cluster (or transferring existing odometer chip to new cluster), inspect pins of chip to assure they
are straight and perpendicular to chip body. If not, align pins before attempting to install in cluster (Figure 4).
11.
The odometer chip should now be placed lightly in the socket with the notch to the left. Note that each of the 14 contact pins is in contact with the
lip of the socket pin. If all 14 pins are not started in the socket, gently reform the pins to match the socket holes. Press the odometer chip into
position with Miller Special Tool #C-4817.
12.
Verify that the odometer chip notch is toward the left when the cluster is face down, and bottom of cluster is toward installer.
13.
Replace access door and install cluster in vehicle per service manual procedures.
14.
If odometer chip was transferred to new cluster or original mileage odometer chip was obtained, verify that the mileage is the same as was
recorded.
This bulletin is released in advance of parts availability. The parts listed in this bulletin will be available in mid-March, 1984.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No. 08-70-02-01 Memory Chip With Zero Mileage
0.4 Hrs.
08-70-02-02 Memory Chip With Original Mileage
0.4 Hrs.
FAILURE CODE:
58 - Internal Defect
