Colt L4-1597cc 1.6L SOHC Turbo (1984)
Alignment: Service and Repair
Toe Adjustment
FRONT
On Colt models, remove outer bellows clip from tie rod before adjusting toe. After completing adjustment, reinstall clamp.
The amount of toe-in of the left front wheel is reduced by turning the tie rod turnbuckle toward the front of the car and the amount of toe-in on the
right front wheel is reduced by turning it toward the rear of the the car. After adjustment, the difference in length between the two tie rods should not
exceed 0.2 inch (5 mm).
REAR
Rear toe is pre-set during vehicle assembly and cannot be adjusted. If toe is not within specifications, check for worn or damaged suspension
components, and damaged or deformed floor pan or body and repair as needed.
